Cisco SPA-841 - Sipura VoIP Phone Administration Manual page 251

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
FAX CED Detect Enable
G726-32 Enable
FAX CNG Detect Enable
G726-40 Enable
FAX Passthru Codec
DTMF Process INFO
FAX Codec Symmetric
DTMF Process AVT
FAX Passthru Method
DTMF Tx Method
To enable detection of the fax Caller-Entered Digits (CED)
tone, select yes. Otherwise, select no.
Default: yes
To enable the use of the G726 codec at 32 kbps, select yes.
Otherwise, select no.
Default: yes
To enable detection of the fax Calling Tone (CNG), select yes.
Otherwise, select no.
Default: yes
To enable the use of the G726 codec at 40 kbps, select yes.
Otherwise, select no.
Default: yes
Select the codec for fax passthrough, G711u or G711a.
Default: G711u
To use the DTMF process info feature, select yes. Otherwise,
select no.
Default: yes
To force the SPA9000 to use a symmetric codec during fax
passthrough, select yes. Otherwise, select no.
Default: yes
To use the DTMF process AVT feature, select yes.
Otherwise, select no.
Default: yes
Select the fax passthrough method: None, NSE, or ReINVITE.
Default: NSE
Select the method to transmit DTMF signals to the far end:
InBand, AVT, INFO, Auto, InBand+INFO, or AVT+INFO. InBand
sends DTMF using the audio path. AVT sends DTMF as AVT
events. INFO uses the SIP INFO method. Auto uses InBand or
AVT based on the outcome of codec negotiation.
Default: Auto
B
249