System Configuration Section; Miscellaneous Settings Section - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
Voice tab > System page >

System Configuration section

Restricted Access
Domains
Enable Web Admin
Access
Admin Passwd
User Password
Voice tab > System page >

Miscellaneous Settings section

Syslog Server
Debug Server
Debug Level
Define up to five IP addresses or fully qualified domain
names to identify the domains in which the SPA9000 is
allowed to operate.
Allows (yes) or prevents (no) local access to the
administration web server
Password for the administrator. Up to 39 characters are
allowed for the passwords. All characters are legal.
Default: no password
Password for the user. Up to 39 characters are allowed for
the passwords. All characters are legal.
Default: no password
The IP address of the syslog server to which the SPA9000
sends syslog messages. Leave blank if you do not want to
receive syslog messages.
The IP address of the debug server, which logs debug
information. The level of detailed output depends on the
Debug Level parameter setting.
The level of debug information that is generated, from 0 to 3.
0 is a minimal level of debugging information that is
acceptable for most purposes. Levels 1 to 3 are typically
used only by Linksys personnel.
NOTE Default: 0
B
201