Static Ip Settings Section; Pppoe Settings Section; Optional Settings Section - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

SPA9000 Field Reference
Router Tab
SPA9000 Voice System Administration Guide
Router tab > Wan Setup page >

Static IP Settings section

Static IP
NetMask
Gateway
Router tab > Wan Setup page >

PPPoE Settings section

PPPoE Login Name
PPPoE Login Password
PPPoE Service Name
Router tab > Wan Setup page >

Optional Settings section

HostName
Domain
Primary DNS
Static IP address of SPA9000, which takes effect if DHCP is
disabled.
Default: 0.0.0.0
The NetMask used by SPA9000 when DHCP is disabled.
Default: 255.255.255.0
The default gateway used by SPA9000 when DHCP is
disabled.
Default: 0.0.0.0
The account name assigned by the ISP for connecting on a
Point-to-Point Protocol over Ethernet (PPPoE) link.
The password assigned by the ISP for connecting on a
Point-to-Point Protocol over Ethernet (PPPoE) link.
The service name assigned by the ISP for connecting on a
Point-to-Point Protocol over Ethernet (PPPoE) link.
The host name of the SPA9000
The network domain of the SPA9000.
The DNS server that is used by the SPA9000
NOTE When DHCP is enabled, you can enter the IP address
of a DNS server in addition to DHCP-supplied DNS servers.
When DHCP is disabled, enter the primary DNS server.
Default: 0.0.0.0
B
194