Managing The Line Selection For Outbound Calls; Line Availability - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

Configuring Phone Lines and Calling Routing Behavior

Managing the Line Selection for Outbound Calls

Managing the Line Selection for Outbound Calls
SPA9000 Voice System Administration Guide
When a user places an outbound call, the SPA9000 chooses a line based on the
group membership of the station and the Call Routing Rule for the line interface.
You can configure the settings to route calls through particular lines, based on
factors such as the dialed number, the destination, or the corporate identity that
you want to represent.
This feature can be used whether the SPA9000 line interface is configured for an
ITSP or a SPA400 voice gateway.
This section includes the following topics:
•
"Line Availability," on page 78
•
"Configuring a Call Routing Rule," on page 79
•
"Entering a Call Routing Rule," on page 81

Line Availability

The SPA9000 considers a line to be available for an outgoing call if the following
conditions are met:
•
The line is enabled in the configuration and is functioning. See
Line Interfaces on the SPA9000," on page
•
The line is authorized by the
See"Configuring a Call Routing Rule," on page
•
The line has capacity to take more calls. See
Line Interface," on page
•
The Dial Plan for this line allows the dialed number. See
Plans," on page 66.
58.
Call Routing Rule
63.
"Configuring
for the dialed number.
79.
"Configuring Call Capacity for a
"Configuring Dial
4
78