Configuring Date And Time On The Gateway - Cisco 3521 Administrator's Manual

Viewing Board Basic Parameters
Click the Basics tab
Step 2
Table 2-2
.
Table 2-2
Element
Model number
Location
Serial Number
Hardware version
Date/Time
Slot number
Software Version
Related Topics
•
•
•

Configuring Date and Time on the Gateway

The gateway has an internal clock that you can set to show the local time of the area in which the gateway
is located.
Procedure
On the sidebar, click Board.
Step 1
Click the Basics tab.
Step 2
Locate the Date/Time field and click Change.
Step 3
The Change Time dialog box appears. The date and time the gateway reports appears in the Set board
time to field.
Administrator's Guide for Cisco IPVC 3521 BRI Gateway, Cisco IPVC 3526 PRI Gateway, and Cisco IPVC 3540 PRI Gateway
2-16
describes the elements that appear in the Basics tab.
Board and Device Basics Page Elements
Configuring Date and Time on the Gateway, page 2-16
Setting the Gateway Location, page 2-17
Resetting Default Board Basic Settings, page 2-17
Chapter 2
Description
Displays the model number of the gateway.
Field where you can specify where the gateway
hardware is located.
Displays the serial number the factory assigns to
the module.
Displays the version number of the module
hardware.
Opens the Change Time dialog box that where
you can set the gateway module's clock.
Displays the slot in which the gateway module is
installed.
Displays the high-level version of the software
installed on the device.
Details button—Opens the Version Details
•
message box that shows the current versions
of the component software installed on the
device.
Installing the Cisco IPVC 3500 Series Gateway
OL-7995-01