Table of Contents
Advertisement
SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
Internal Music Script
Internal Music Refresh
Intvl
Internal Music LBR Codec Selects one low bit-rate codec as an alternative to G711u
Internal Music Preferred
Codec
Internal Music Use Pref
Codec Only
Script that tells the SPA9000 how to play the downloaded
music file, in the format [section[,section[,...]]], where:
section
n
start
end
= [[
](
/
[/
n
= number of times to repeat the section before moving to
the next section. Default: 1
start
/
end
= starting and 1+ending sample for this section;
note that samples are numbered from 0 to total-length – 1.
You may enter –1 or a very large number if the end of the file
is intended as the ending sample. Default start is 0, and
default end is end of the file.
pause
= number of samples to pause after the ending sample
is played. Default: 0
pause2
= additional number of samples to pause after the
entire n repetitions of the section are played. Default: 0
A maximum of 16 sections can be specified. Samples should
be encoded in G711u format at 8000 samples/second. When
all sections are played, the SPA9000 replays from the first
section again.
Examples:
40000 (plays the entire file, pauses for 5s, then repeats)
2(0/32000),3(32000/100000/4000)2000,(100000/-1)80000
The interval in seconds between refreshing an internal music
session.
Default: 0 (disables session refreshes)
and G711a for playing internal music. Choices are {none,
G729a, G726-16, G726-24, G726-32, G726-40}.
Default: none
Selects which codec is the preferred choice to play internal
music. Choices are {G711u, G711a, Low Bit Rate}. Low Bit
Rate refers to the selected <Internal Music LBR Codec>. If
<Internal Music LBR Codec> is none, G711u is the preferred
codec also.
Default: G711u
Forces the internal music player to use the preferred codec
only.
Default: no
pause
pause2
])][
]
B
217
Hide quick links:
Advertisement
Table of Contents
