Editing Dial Plans - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

Configuring Phone Lines and Calling Routing Behavior
Configuring Dial Plans
STEP 1
STEP 2
SPA9000 Voice System Administration Guide
Syntax for the Interdigit Short Timer
•
SYNTAX 1: S:s, ( dial plan )
Use this syntax to apply the new setting to the entire dial plan within the
parentheses.
•
SYNTAX 2: sequence Ss
Use this syntax to apply the new setting to a particular dialing sequence.
s: The number of seconds; if no number is entered after S, the default timer of 5
seconds applies.
Examples for the Interdigit Short Timer
•
Set the timer for the entire dial plan.
EXAMPLE:
S:6, (9,8<:1408>[2-9]xxxxxx | 9,8,1[2-9]xxxxxxxxx |
9,8,011xx. | 9,8,xx.|[1-8]xx)
While entering a number with the phone off hook, a user can pause for up
S:6,
to 15 seconds between digits before the Interdigit Short Timer expires. This
setting is especially helpful to users such as sales people, who are reading the
numbers from business cards and other printed materials while dialing.
•
Set an instant timer for a particular sequence within the dial plan.
EXAMPLE: (9,8<:1408>[2-9]xxxxxx |
9,8,011xx. | 9,8,xx.|[1-8]xx)
9,8,1[2-9]xxxxxxxxxS0
when the user dials the final digit in the sequence.

Editing Dial Plans

You can edit dial plans and can modify the control timers.
Editing the System Dial Plan
Follow this procedure to edit the system dial plan, which will be auto-provisioned
to the first extension of each phone.
Connect to the SPA9000 administration web server, and choose Admin access
with Advanced settings.
Click Voice tab > SIP.
With the timer set to 0, the call is transmitted automatically
9,8,1[2-9]xxxxxxxxxS0
4
|
74