Configuring The Client Lease Time - Cisco ASR 9000 Series Configuration Manual

Enabling DHCP Proxy
Command or Action
Step 2
dhcp ipv4
Example:
RP/0/RSP0/CPU0:router(config)# dhcp ipv4
Step 3 profile profile-name proxy
Example:
RP/0/RSP0/CPU0:router(config-dhcpv4)#
profile profile1 proxy
Step 4
relay information option remote-id value
Example:
RP/0/RSP0/CPU0:router(config-if)# relay
information option remote-id 9
Step 5 Use the commit or end command.
Configuring a Remote-ID: An example
configure
dhcp ipv4
profile profile1 proxy
relay information option remote-id 9
!
!
end

Configuring the Client Lease Time

Perform this task to configure the client lease time. It defines the time period after which the client lease
expires.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.2.x
92
Purpose
Enters the IPv4 DHCP configuration mode.
Creates a DHCP proxy profile.
Inserts relay agent information for remote id suboptions such as
remote-ID value.
commit—Saves the configuration changes and remains within
the configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the
configuration session.
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration mode, without
committing the configuration changes.
Establishing Subscriber Sessions
OL-26148-02