Using The Ivr With An Sas Line - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

Configuring Music on Hold
Configuring a Streaming Audio Server
STEP 1
STEP 2
STEP 3
STEP 4
SPA9000 Voice System Administration Guide
g. Close the window for the Telephone Configuration page.
h. Repeat this step to configure each phone, as needed.

Using the IVR with an SAS Line

The IVR can still be used on an SAS line, but the user needs to follow the following
steps:
Power off the SPA9000.
Connect a phone to the port and make sure the phone is on-hook.
Power on the SPA9000.
Pick up handset and press * * * * to invoke IVR in the usual way.
If the SPA9000 boots and finds that the SAS line is on-hook, it does not remove
battery from the line so that IVR may be used. But if the SPA9000 boots up and
finds that the SAS line is off-hook, it removes battery from the line because no
audio session is in progress.
6
130