Cisco SPA-841 - Sipura VoIP Phone Administration Manual page 224

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
Voice tab > SIP page
PBX Phone Parameters section
Next Auto User ID
Phone Ext Password
Phone Upgrade Rule
Phone Dial Plan
User-id assigned to the next (unprovisioned) client station
that requests initial profile from the SPA9000 internal
configuration server. The parameter is automatically
incremented once a new user-id is assigned.
Default: 5000
A REGISTRATION password to apply on Ext 1 of all the client
stations. If password is not specified, all stations are allowed
to register without being challenged by the SPA9000.
Default: blank
Upgrade rule for all the client stations. For example:
tftp://192. 1 68.2.207/$PN.bin
Note that the $PN macro is expanded to the product name of
the client requesting the firmware. This allows upgrading
phone clients with different firmware using a single rule.
Default: blank
Dial plan for the client stations.
Default:
(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-
9]xxxxxxS0|xxxxxxxxxxxx.)
This dial plan tells the phone to do the following:
•
Allows any 3-character entry, with any character in
*xx:
the first position
•
Allows 311, 411, 611, and 911
3469]11:
•
Allows 0
0:
•
Allows 00
00:
•
[2-9]xxxxxx:
as in a local call without an area code
•
1xxx[2-9]xxxxxxS0:
telephone number starting with 1, as in a long distance
call; with the entry, the dialed digits are evaluated
S0
after 0 seconds
•
xxxxxxxxxxxx.: Allows any entry of 12
or more digits
Allows any 7-digit telephone number,
Allows any 10-digit
B
222