Configuring A Spa400 For Pstn Access - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

Administering the SPA400 and Voice Mail Service

Configuring a SPA400 for PSTN Access

STEP 12
Configuring a SPA400 for PSTN Access
SPA9000 Voice System Administration Guide
line. The call is directed according to the Contact List. Also, in the SPA400 web
configuration page, click the Status tab, and then verify that a voltage value
appears in the Battery Level section.
If the battery level is 0 V on a line that you have connected to the PSTN,
NOTE
troubleshoot the phone wiring.
•
Connect to the SPA9000 administration web server, and choose Admin access
with Advanced settings. Click Voice tab > Info. Scroll down to the Line 2
Status section, and verify that the
Click Save Settings.
If you are using this SPA400 for voice mail service, continue to
NOTE
a SPA400 for Voice Mail Service," on
Typically, there is no need to change the default settings on the Voice page. Make
changes only if a problem is suspected and only after consulting with a service
technician from your telephone service provider. It is essential that the settings on
your system are compatible with those of the Central Office.
SPA400 Administration > Status: Battery Level
Registration Status Registered
is
page112.
5
.
"Configuring
111