Context Configuration; System Configuration; Finding Configuration Errors - Cisco ASR 5000 Series Administration Manual

▀ Verifying the Configuration
Context : test1
Status : STARTED
Restart Counter : 8
EGTP Service : egtp1
LMA Service : Not defined
Session-Delete-Delay Timer : Enabled
Session-Delete-Delay timeout : 10000(msecs)
PLMN ID List : MCC: 100, MNC: 99
Newcall Policy : None

Context Configuration

Verify that your context was created and configured properly by entering the following command:
show context name <name>
The output shows the active context. Its ID is similar to the sample displayed below. In this example, a context named
test1 is configured.
Context Name
------------
test1

System Configuration

Verify that your entire configuration file was created and configured properly by entering the following command:
show configuration
This command displays the entire configuration including the context and service configurations defined above.

Finding Configuration Errors

Identify errors in your configuration file by entering the following command:
show configuration errors
▄ Cisco ASR 5000 Series Femto Network Gateway Administration Guide
54
ContextID State
--------- -----
2 Active
Verifying and Saving Your Configuration
OL-24872-01