Configuring Cisco Ipvc 3544 Chassis Parameters; Viewing The System Section - Cisco 3521 Administrator's Manual

Configuring Cisco IPVC 3544 Chassis Parameters

In the SNMP Read community and Write community fields, enter default strings used to enable SNMP
Step 4
communication between the gateway and a external application.
On the toolbar, click Upload.
Step 5

Configuring Cisco IPVC 3544 Chassis Parameters

If your Cisco IPVC 3540 PRI Gateway module is installed in the top slot of the
Cisco IPVC 3544 chassis, then the module also performs PCI bus functions for the chassis. In the
Gateway interface, you can use the System section to monitor chassis functions remotely.
One of the functions the chassis performs is to monitor ambient temperature. You can set temperature
thresholds in the System section. The chassis uses these thresholds to trigger a warning that the ambient
temperature exceeds specification and when the temperature has returned to five degrees below the
warning threshold.
Related Topics
•
•
•

Viewing the System Section

You can view the System section by selecting it in the Gateway interface.
Procedure
On the sidebar, click System.
Step 1
Table 2-4
Administrator's Guide for Cisco IPVC 3521 BRI Gateway, Cisco IPVC 3526 PRI Gateway, and Cisco IPVC 3540 PRI Gateway
2-20
Viewing the System Section, page 2-20
Setting Cisco IPVC 3544 Chassis Temperature Thresholds, page 2-22
Refreshing the System Section, page 2-22
lists the elements that appear in the System section.
Chapter 2 Installing the Cisco IPVC 3500 Series Gateway
OL-7995-01