Table of Contents
Advertisement
Unpack and Install the Chassis
Figure 21: Attach 8608 Chassis to Rack - Front view
1
3
Step 5
Use the screws provided with the rack to attach the chassis rear rails. Install screws from outside the chassis
to tighten each screw to 26 in-lbs (2.93 N-m) of torque. Four screws on each side of the chassis. Slide the rear
brackets into the ear bracket that are attached to the chassis.
Chassis
M4 x 6-mm Phillips flat-head screws (10)
2
Bottom rails
Hardware Installation Guide for Cisco 8600 Series Routers
Mount Chassis Into the Rack
35
Advertisement
Table of Contents
