Attach Door Kit To Chassis - Cisco 8600 Series Hardware Installation Manual

Unpack and Install the Chassis
Figure 24: Cable Management Brackets for 8608 Chassis
1
3
5
What to do next
Attach door kit to the chassis.

Attach Door Kit to Chassis

Before you begin
Before you can attach the front door to the chassis, you must attach the cable management brackets and bottom
plate onto the chassis.
Required tools and equipment:
• Phillips screwdriver with a torque capability (customer supplied)
• Door kit (8608-DRKT)
Top hood. The top hood and cable
management brackets are one unit.
M4 x 18-mm Phillips flat-head screws
Cable management brackets. The top hood
and cable management brackets are one
unit.
2 Counter sink screws
4 Alignment pins
Hardware Installation Guide for Cisco 8600 Series Routers
Attach Door Kit to Chassis
39