Table of Contents
Advertisement
LEDs
LED
IN (Input OK)
Color
Status
Both inlet power present
Green
Note
Flashing Green
The module is in one of the following states:
Note
Note
Off
The module is in one of the following states:
Note
Hardware Installation Guide for Cisco 8600 Series Routers
AC input voltage is 70 V minimum. AC
PSU is single-input supply.
DC input voltage is -40 V minimum. DC
PSU is dual-input supply.
• Only one input power present
• Hot unplugged
AC input voltage is between 70 V and
85 V.
DC input voltage is:
• between -27 V and -37 V
• greater than -75 V and less than -77
V
In DC dual-inputs mode, the absence of
LED light indicates that DC input(s) are
less than -26 V or greater than 77 V.
For a DC input voltage between -27 V
and -37 V, or greater than -75 V and less
than -77 V, the IN LED flashes on/off
(0.5 sec ON / 0.5 sec OFF).
In single-input mode, the IN LED
flashes on/off to indicate an ON state.
• No input is present
• Module firmware upgrade is in-progress
AC input voltage is less than 70 V.
DC input voltage is less than -26 V.
Power Supply LED
131
Advertisement
Table of Contents
