Table of Contents
Advertisement
Removing an AC Power Supply Unit
1
Step 5
Grasp the PSU with one hand; place your other hand underneath to support the bottom of the power supply.
Slide it out of the bay completely.
Figure 81: Slide the PSU Out
Caution
Warning
What to do next
Set the power supply aside and proceed with installing the new or replacement PSU. For more information,
see
Connect AC Power to the Chassis, on page
Hardware Installation Guide for Cisco 8600 Series Routers
116
Release latch, which should be pressed inwards
Do not leave any power supply slot open for any amount of time while the system is powered
up. Prior to inserting a new PSU, for instance, when replacing the unit, ensure there are no foreign,
conductive or other objects, or debris in the slot.
Statement 1028 More Than One Power Supply
This unit might have more than one power supply connection. To reduce risk of electric shock,
remove all connections to de-energize the unit.
47.
Replace Chassis Components
Advertisement
Table of Contents
