Cisco 8600 Series Hardware Installation Manual page 19

Cisco 8600 Series Routers Overview
• the output capabilities of the PSUs
• the power redundancy mode that you use
The following table lists the amount of power available for Cisco 8600 series routers from all available power
trays.
Table 3: Maximum Power Available
Number of
PSUs
1
2
3
4
Supported Optics
Note
Combined Mode in Watts (No redundancy)
3190
6380
9570
12760
To determine which transceivers and cables are supported by this router, refer to the Transceiver Module
Group (TMG) Compatibility Matrix Tool:
https://tmgmatrix.cisco.com/
• For QSFP-DD data sheets, refer to the
Sheet.
• For QSFP28 data sheets, refer to the
• For QSFP+ data sheets, refer to the
• For SFP data sheets, refer to the
• For SFP28 data sheets, refer to the
N+1 Redundancy Mode in Watts (with Single
Supply Loss)
—
3190
6380
9570
Cisco 400G QSFP-DD Cable and Transceiver Modules Data
Cisco 100GBASE QSFP-100G Modules Data
Cisco 40GBASE QSFP Modules Data
Cisco 50GBASE SFP56 Modules Data Sheet
Cisco 25GBASE SFP28 Modules Data Sheet
Hardware Installation Guide for Cisco 8600 Series Routers
Supported Optics
Sheet.
Sheet.
13