Unpack And Install The Chassis; Unpack The Chassis - Cisco 8800 Series Hardware Installation Manual

Unpack and Install the Chassis

Note The images in this chapter are only for representation purposes, unless specified otherwise. The chassis' actual
appearance and size may vary.
•
•
•
•
•
•

Unpack the Chassis

Tip
Be sure to save the packaging in case you need to return any of the components products.
Ensure that there is sufficient room around the chassis pallet for unpacking. For information about the chassis
dimensions and clearance requirements see, Clearance Requirements.
Carefully move the pallet containing the chassis to the staging area where you plan on unpacking it.
Unpack the Chassis, on page 23
Install Bottom-Support Rails, on page 27
Transfer Chassis to a Mechanical Lifting Device, on page 28
Mount Chassis Into the Rack, on page 30
Install Cable Management on a Chassis , on page 45
Attach Front Door to Chassis, on page 56
C H A P T E R
Hardware Installation Guide for Cisco 8800 Series Routers
3
23