Migratingfromsinglerouteprocessorsystemtodual-Routeprocessorsystem - Cisco 8600 Series Hardware Installation Manual

Replace Chassis Components
g) Verify that the route processor card LEDs turn on and appear as follows:

MigratingfromSingleRouteProcessorSystemtoDual-RouteProcessorSystem

The Cisco 8608 router supports a single Route Processor (RP) system and a dual Router Processor system.
This section provides step-by-step instructions for migrating from a single-RP system to a dual-RP system.
• The Status LED is in solid amber color and later turns to solid green color.
Figure 71: Route Processor LEDs
1 Sync
2 Status
3 Attention
4 Management Activity
5 GPS
6 Active
Migrating from Single Route Processor System to Dual-Route Processor System
Hardware Installation Guide for Cisco 8600 Series Routers
99