Table of Contents
Advertisement
Connect AC Power to the Chassis
When correctly installed, the latch on the PSU locks-in the module, to avoid accidental removal of the module.
Figure 31: Slide the PSU into the Power Supply Bay
1
Step 4
Verify that all site power and grounding requirements have been met.
Step 5
Verify that you have the correct AC power cord for your location and power supply rating and only then plug
the power cord connector into the power supply AC-in receptacle.
Hardware Installation Guide for Cisco 8600 Series Routers
50
Power supply latch, which clicks into place
Powering on the Router
Advertisement
Table of Contents
