Table of Contents
Advertisement
Mount Chassis Into the Rack
Procedure
Step 1
Install the ear brackets to the sides of the chassis. Use the M4 x 6-mm Phillips flat-head screws to 26 in-lbs
(2.93 N-m) of torque to fix the ear brackets to the chassis.
Figure 20: Install Ear Brackets to Sides of the Chassis
1
2
Step 2
Using your mechanical lift, raise the chassis so that it is in level with or not more than 1/4 inch [0.635cm]
above the rails.
Step 3
Push the chassis all the way onto the rack so that the vertical mounting brackets on the front of the chassis
come in contact with the vertical mounting rails on the rack.
Step 4
Use screws provided with the rack to secure the chassis with the vertical mounting rails on the rack. Use 12
screws in the front side and 8 screws in the rear side to secure the chassis on to the rackmount.
Hardware Installation Guide for Cisco 8600 Series Routers
34
Unpack and Install the Chassis
Ear brackets
M4 x 6-mm Phillips flat-head screws
Advertisement
Table of Contents
