Table of Contents
Advertisement
Attach Door Kit to Chassis
Note
The door kit is optional.
Procedure
Step 1
After you've installed the cable management brackets onto the chassis, secure the left and right door brackets
to the chassis vertical mounting brackets with flat-head Phillips screws M4 x 18-mm screws (use all screws
provided in the kit). Insert one screw at the top and one at the bottom, likewise add more screws in this
sequence. The number of screws may vary based on the chassis.
Figure 25: Secure Left and Right Door Brackets
Step 2
Position the bottom cover with its brackets pointing up, to the bottom of the two sides (right and left) of the
door bracket screw holes.
Hardware Installation Guide for Cisco 8600 Series Routers
40
Unpack and Install the Chassis
Advertisement
Table of Contents
