Table of Contents
Advertisement
Safety Guidelines
Warning
Safety Guidelines
Before you perform any procedure in this document, review the safety guidelines in this section to avoid
injuring yourself or damaging the equipment. The following guidelines are for your safety and to protect the
equipment. Because the guidelines do not include all hazards, be constantly alert.
• Keep the work area clear, smoke and dust-free during and after installation. Do not allow dirt or debris
• Do not wear loose clothing, jewelry, or other items that could get caught in the router or other associated
• Cisco equipment operates safely when used in accordance with its specifications and product-usage
• If potentially hazardous conditions exist, do not work alone.
• Take care when connecting multiple units to the supply circuit so that wiring is not overloaded.
• This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
• When installing or replacing the unit, the ground connection must always be made first and disconnected
• To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the
• Hazardous voltage or energy is present on the backplane when the system is operating. Use caution when
Hardware Installation Guide for Cisco 8600 Series Routers
18
Statement 1015 Battery Handling
To reduce risk of fire, explosion, or leakage of flammable liquid or gas:
• Replace the battery only with the same or equivalent type recommended by the manufacturer.
• Do not dismantle, crush, puncture, use a sharp tool to remove, short the external contacts, or dispose of
the battery in fire.
• Do not use if battery is warped or swollen.
• Do not store or use battery in a temperature > .
• Do not store or use battery in low air pressure environment < .
to enter into any laser-based components.
components.
instructions.
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority
or an electrician if you are uncertain about whether suitable grounding is available.
last.
handles on modules (such as power supplies, fans, or cards); these types of handles are not designed to
support the weight of the unit.
servicing.
Prepare for Installation
Advertisement
Table of Contents
