Configure The Web Server From The Phone Screen Interface; Configure Ldap For The Cisco Unified Ip Conference Phone 8831 For Third-Party Call Control - Cisco 8831 Administration Manual

Chapter 2 Customize Standard Features
Under the System Configuration section in the Enable Web Server field, verify that the parameter is
Step 2
set to Yes to enable the web administration server.
Step 3 In the Web Server Port field, enter the port to access the web server. The default is port 80.
In the Enable Web Admin Access field, you can enable or disable local access to the Admin Login of
Step 4
the phone web user interface. Defaults to Yes (enabled.)
Step 5 In the Admin Passwd field, enter a password if you want the system administrator to log in to the phone
web user interface with a password. The password prompt appears when an administrator clicks Admin
Login. The maximum password length is 32 characters.
In the User Password field, enter a password if you want users to log in to the phone web user interface
Step 6
with a password. The password prompt appears when users click User Login. The maximum password
length is 32 characters
Click Submit All Changes.
Step 7

Configure the Web Server from the Phone Screen Interface

To enable the phone web user interface from the Phone tab:
Step 1 Press menu.
Step 2 Select Network and Enable Web Server.
Select Edit.
Step 3
Press y/n to toggle the selection to Yes and enable.
Step 4
Click OK > Save.
Step 5
Configure LDAP for the Cisco Unified IP Conference Phone 8831
for Third-Party Call Control
The Cisco Unified IP Conference Phone 8831 for Third-Party Call Control supports Lightweight
Directory Access Protocol (LDAP) v3. LDAP Corporate Directory Search allows a user to search a
specified LDAP directory for a name, phone number, or both. LDAP-based directories, such as Microsoft
Active Directory 2003 and OpenLDAP-based databases, are supported.
Users access LDAP from the Directory menu on their IP phone. There is a limit of 20 records returned
from a LDAP search.
The instructions in this section assume you have the following equipment and services:
•
To prepare the LDAP Corporate Directory Search:
Click Admin Login > advanced > System.
Step 1
In the Optional Network Configuration section, under Primary DNS, enter the IP address of the DNS
Step 2
server. (Only required if using Active Directory with authentication set to MD5.)

Configure LDAP for the Cisco Unified IP Conference Phone 8831 for Third-Party Call Control

A LDAP server, such as OpenLDAP or Microsoft Active Directory Server 2003
Cisco Unified IP Conference Phone 8831 for Third-Party Call Control Administration Guide
2-7