Assign A Ring Tone With The Phone Web Page; Turn On Dnd From The Phone Web Page; Configure The Screen Saver With The Phone Web Interface - Cisco 8832 Settings

Hide thumbs Also See for 8832:

Table of Contents

Assign a Ring Tone with the Phone Web Page

Procedure

Step 1

On the phone web page, select User Login > Voice > Ext(n), where (n) is the number of an extension.

Step 2

In Call Feature Settings area, choose a ringtone from the Default Ring drop-down list.

If you don't want to specify a ringtone for the phone line, choose No ring. Your phone doesn't ring when

receiving an incoming call.

Step 3

Click Submit All Changes.

Procedure

Step 1

On the phone web page, select User Login > Voice > User.

Step 2

Under Supplementary Services, set DND Settings to Yes.

You can turn on DND on for all lines if your administrator hasn't enabled feature key sync (FKS).

Step 3

Click Submit All Changes.

You can configure a screen saver for the phone. When the phone is idle for a specified time, it enters screen

saver mode.

Any button press returns the phone to normal mode.

Procedure

Step 1

On the phone web page, select Voice > User.

Step 2

In the Screen section, set up the fields as described in the following table.

Settings

Table of Contents