Table of Contents
Advertisement
24.7. Move the screen mount safety brackets to Operational Mode position
Each screen mount module has four safety
brackets, which are all in Safe Mode position when
shipped.
To avoid the risk of personal injury:
•
Never move the screen mount safety
brackets out of the Safe Mode position
(transport position) when the screen
is NOT hanging on the screen mount
module.
•
If you must remove the screen from the
screen mount module, always move
the safety brackets back to Safe Mode
position before lifting off the screen.
When the screen is in place, you must move the
brackets from Safe Mode to Operational Mode
position. Otherwise you will not be able to push
the screen fully toward the wall.
Repeat the procedure on both sides of the screen
mount module.
Safe Mode
(horizontal position)
Operational Mode
(vertical position)
1. Gently pull the screen downward.
×2
3. Loosen the remaining screw on each
bracket, and rotate the upper bracket down
and the lower bracket up.
×2
2. Identify the brackets behind the screen. There
are two on each side of the screen mount.
Remove one screw from each bracket.
×2
4. Add the two screws that you just removed,
and tighten all screws with the bracket in its
new position.
75
Advertisement
Table of Contents
