Packaging - Cisco Room Panorama Installation Manual

85-inch main screens
Table of Contents

Advertisement

Risk of personal injury
There is a potential hazard risk tied
to the gas springs in the screen
mount modules when installing or
dismantling the system. There is
no risk involved when following the
Install Guide step by step, but if
caution is not taken regarding the
screen mount safety brackets, there
is a chance of personal injury.
To help lifting the screen with the
screen mount module, the gas
springs store a lot of energy. If the
screen mount safety brackets are
moved out of the
Safe Mode
position
before the screen is mounted, the
screen mount module can shoot out
at high speed, potentially causing
harm. The same goes if one tries to
remove or dismantle the gas springs
from the product.
To avoid the risk of personal injury:
Do not disassemble any of the
pre-assembled parts of a display
cavity at any time.
Do not move the screen mount
safety brackets out of the
Safe Mode
position (transport
position) before the main screens
are mounted (refer to step 24.7).
4

Packaging

You have received four or five pallets with parts
and components, depending on whether you have
ordered the optional cosmetic wall.
The pallets are marked with A, B, C, D, and E.
During installation, you need parts from pallet
first.
This installation guide is on pallet A, the wiring
diagram and other information from us are on
pallet C.
B
A
Wall structure pallet
D
C
Component pallet
E
Cosmetic wall pallet
(optional)
Boxes and labels
There are several boxes with parts on each pallet.
The boxes are marked with a letter followed by
a number. The letter identifies the pallet. For
A
example A1, A2, A3, ... for the boxes on pallet A.
In general, you need box
so on. But you don't always need all the parts
contained in a box or pallet with a lower number
before you need parts from the next.
The installation guide refers to these labels to
show where the required parts for each step are.
Example from installation guide
4x
Cavities pallet
4x
Display pallet
4x
A1
before box A2, and
subwoofer stands
A5
subwoofers
C1
50 × 50 mm (2 × 2 in.) piece of foam
A6

Advertisement

Table of Contents
loading

Table of Contents