Mount The Content Cavity And Screen Mount Brackets - Cisco Room Panorama Installation Manual

18. Mount the content cavity and screen mount brackets

The content cavity, with the mounting brackets for
the content screen, is above the cooling and rack
cavities.
Content cavity and screen brackets
1x
Content cavity B8
1x
Screen bracket, upper B9
1x
Screen bracket, lower B9
9x
(M6x12, Torx 30)
44
18.1. Find the cables
1. Find the cables for the camera, and let them
hang down in front of the amplifier and codec:
• 2x HDMI (C1, C2)
• 1x Ethernet (C3)
• 1x Power (C4)
2. Find the cables for the content screen, and
lay them on the left or right display cavities as
shown in the list:
• 1x HDMI (S3) - right
• 1x Ethernet (S6) - right
• 1x Power (S9) - left
18.2. Mount the cavity
Hang the cavity on the risers and fasten with four
screws .
(M6x12, Torx 30)