Table of Contents
Advertisement
1. Fasten the trim, through a front profile
with five screws
(M4x12, Torx 20)
Repeat the procedure for both the left and
right trims.
Add a spacer to
this screw.
,
2. Fasten the center trim, through a front profile
(3203 #5)
.
(3203 #5)
, with six screws
.
(M4x12, Torx 20)
3. Fasten the trim, through a side profile
with two screws.
Repeat the procedure for both the left and
right trims.
Add a spacer to
this screw.
4. We recommend that you use the laser level to
check that the all profiles are level.
,
(3203 #1)
41
Advertisement
Table of Contents
