Table of Contents
Advertisement
A12. Mount the subwoofer grille
There is a grille in front of the subwoofer outputs.
It is composed of three parts.
Subwoofer grille
1x
center part with a cut-out
left and right part,
3x
center part without a cut-out
screws, Ø 4 mm (provided by installer)
6x
Recommended color: black
1. Choose which center part to use:
•
Use the one with a cut-out if you are going
to lead the cables between the table and
the video system across the floor.
•
Otherwise, use the one without a cut-out.
2. Fasten each profile with two screws.
The subwoofer stands should be as close to
the grilles as possible, but not touching them.
That would cause rattling noise. You may want
to add some foam, or similar material, to avoid
metal-to-metal contact.
B12
B12
Left part
Center part
(with or without cut-out)
Right part
109
Advertisement
Table of Contents
