Table of Contents
Advertisement
22. Mount the loudspeakers
There are six loudspeakers on each side. They are
inserted in a mounting structure that is fastened to
the risers.
Loudspeakers
2x
Speaker mounting structure (left and right)
12x
Loudspeaker
C10
1x
Screen support profile
A1
10x
(M6x12, Torx 30)
22.1. Mount the loudspeaker mounting structure
Repeat this procedure for both sides.
1. Enter a screw
plate as shown, without tightening.
A9
into the mounting
(M6x12, Torx 30)
Don't tighten the
screw so much that
it becomes difficult
to hang the mounting
structure on it.
2. Hang the mounting structure onto the screw.
The left and right mounting structures are
not identical; they are marked with L and R,
respectively. Check that you mount them on
the correct side.
The largest hole is
toward center
A small bracket
is out to the side
3. Add two more screws
(M6x12, Torx 30)
tighten the first screw.
. Also
63
Advertisement
Table of Contents
