Table of Contents
Advertisement
19.7. Straighten the lower corner panels and tighten screws
Before tightening the screws, make sure the lower corner panel is straight and plumb.
Repeat the procedure on both sides.
1. Make sure the corner panel is straight and
plumb.
Straight and
plumb
2. Tighten the screws that you entered without
tightening in the following steps:
Step 19.1:
(M6x12, Torx 30)
Step 19.3:
(M4x12, Torx 20)
Step 19.6:
(M4x12, Torx 20)
3. Add two more screws
(M4x12, Torx 20)
side trim to the joining module.
to fix the
53
Advertisement
Table of Contents
