Mount The Cosmetic Panels - Cisco Room Panorama Installation Manual

19. Mount the cosmetic panels

Before you start mounting the panels, take
an extra look to assure that these cables are
connected:
• Cable to the subwoofers (4x)
• Power cable to the Ethernet switch
Cosmetic panels
2x
Lower corner panel E6
2x
Upper corner panel E8
2x
Upper panel lock, E4
left and right
46
The subwoofers and the rear side of the Ethernet
switch are not easily accessible once the panels
have been mounted.
2x
Lower front panel E7
2x
Upper front panel E9
2x
Middle rail bracket E5
2x
Joining module, left and right E5
4x
Horizontal profile (3201 #3) E3
2x
Vertical profile (3203 #1) E3
2x
Vertical profile (3201 #1) E3
2x
Vertical profile (3201 #2) E3
2x
Wall top trim (left and right) E4
2x
Wall side trim, upper, left and right
2x
Wall side trim, lower, left and right
46x 10x
(M4x12, Torx 20) (Nylon spacer, 5 mm)
6x 8x
(M6x12, Torx 30) (Washer, 0.9 mm)
D1
E2