Table of Contents
Advertisement
Before you start the installation
It is important that you read our Room Preparation
Guidelines before you start the installation. They
are available online.
During the installation you need both the
Installation Guide (this guide) and the Wiring
Diagram. The wiring diagram is shipped with the
product.
We recommend you to check if there are newer
versions of the Installation Guide and Wiring
Diagram online. You find the version number on
the last page (format: 78-xxxxxx-yyyy, where
yyyy is the version number or Dxxxxx.yy, where
yy is the version number).
Download information
You can download the room preparation
guidelines, wiring diagram, and installation
instructions from:
https://www.cisco.com/go/panorama-installation
This webpage contains installation guides for all
products in the Cisco Room Series. Look for Cisco
Room Panorama.
*
A new main screen model for Room Panorama was introduced in 2023. The new model is 85 inches; the original model was 82 inches. Room Panorama has the same functionality regardless of main
*
screen model. However, since there are a few installation and cabling differences between them, there are two sets of installation instructions and wiring diagrams online.
Installation by instructed personnel
Due to the size and mass of the Room Panorama
system, it must be installed according to our
installation instructions by qualified personnel. The
installer must determine whether the wall must be
reinforced prior to the installation and calculate
the number and type of screws required for a safe
wall mounting.
The product is fastened to the wall
The Room Panorama is fastened to the wall with
three horizontal rails. These rails must be fastened
so that they can safely support the product. In
total, the product weighs close to 600 kg (1320 lb).
When installed correctly, the system rests on the
floor.
Perfectly flat wall
The rails must be level. If the wall is not perfectly
flat, horizontally and vertically, this must be
compensated for before you mount the rails.
The system has adjustable feet, which can
compensate for the floor not being perfectly flat.
Power
Room Panorama consists of separately approved
components.
This requires each component to
be connected directly to a wall socket outlet
that is installed by a qualified electrician.
are not allowed to use a power strip (multi-socket
extension cord).
Since each component has a power cord
connected directly to a wall socket outlet, there
is no total electrical rating (voltage, current, and
frequency) for the Room Panorama system. You
should check the rating label on each component.
Cosmetic wall
Part 1 of this guide explains how to install the
Room Panorama with the optional cosmetic wall
panels offered by us.
As an alternative to these cosmetic wall panels,
you can integrate the Room Panorama system
fully in the room by making your own custom wall
integration. This is described in Part 2.
You
3
Advertisement
Table of Contents
