Table of Contents
Advertisement
17.2. Fasten the upper trim
1. Enter three screws
(M4x12, Torx 20)
support as shown, without tightening.
Don't tighten the
screws so much
that it becomes
difficult to hang the
trim on them.
into the trim
2. Hang the trim onto the screws.
3. Tighten the three screws, and add two more
(M4x12, Torx 20)
two washers.
Add a spacer and
two washers to
the center screw.
- one of them with a spacer and
43
Advertisement
Table of Contents
