Table of Contents
Advertisement
Spacers for the content screen
×2
Adjust the spacers so that they are 7 mm (0.3 in.) deeper than the
wallboards.
Spacers for the main screens
×4
Adjust the spacers so that they protrude about 10 mm (0.4 in.) outside
the wallboards.
7 mm
(0.3 in.)
10 mm
(0.4 in.)
A18. Mount the remaining components
and grilles
Follow
steps 20-26
starting on page 60 in the
main part of the installation guide to:
•
Mount the camera
•
Mount the fan duct
•
Mount the loudspeakers
•
Mount the content screen
•
Mount the right screen and deco grille
•
Mount the left screen and deco grille
•
Mount the speaker grille
Skip step 27.
A19. Mount and connect the components
on the table and finish up
Follow
steps 28-31
starting on page 90 in the
main part of the installation guide to:
•
Pull up and connect the cables between the
system and components on the table
•
Mount the Ethernet switch in the table
•
Place components on the table
•
Finish up
113
Advertisement
Table of Contents
