Table of Contents
Advertisement
Menus and Submenus
In Programming Mode, menus and submenus are organized as shown here:
Calibration
Fresh Air
Multi Sensor Span
Single Sensor Zero
Single Sensor Span
Multi Sensor Bump
Single Sensor Bump
Cal. Reference
Change Cal. Gas
Multi Cal. Select
Change Span Value
Change Span 2
Value**
* "Message" menu item appears only when messages have been received by the AreaRAE
Plus/Pro.
** 7R+ sensors and 4R+ ppb sensors
Editing and Selecting Parameters and Sensors
There are a few basic ways to edit parameters, select sensors, and perform other activities in the
AreaRAE Plus/Pro. The actions performed by pressing keys always match 1-to-1 with the boxes
along the bottom of the display and the three keys. Some parameters are edited by scrolling and
selecting individual items (black bars behind white text act as highlighters). Some include a
choice via "radio buttons," where only one item in a list can be selected, while other menus use
boxes for you to "check" with an "X," and these allow for multiple items in a list to be selected. In
all cases of editing, you can save or undo your choice.
AreaRAE
Measurement
Sensor On/Off
Alarm Limits Clear Datalog
Change Meas.
Alarm Mode Datalog Interval GPS
Gas
Measurement
Alarm
Unit
Settings
Comfort
Beep
Alarms
Datalog
Sensor Selection Mesh
Data Selection
Datalog Type
Memory Full
Action
53
Wireless
Monitor
Sel Primary
LCD Contrast
Radio
Zero At Start
Fast Startup
ISM
Language
Wi-Fi
Site ID
Message*
User ID
Secure In
Place
User Manual
Advertisement
Table of Contents
