Table of Contents
Advertisement
ISM
The AreaRAE Plus/Pro and any other devices that you want to interconnect wirelessly through
ISM must have the same Network ID (1 to 4095, but do not use 255), as well as a unique Unit ID
(1 through 64). You can set the Network ID in the instrument or through Safety Suite Device
Configurator (SSDC).
1.
Press [Y/+] to increase the number and [N/-] to advance to the next digit.
2.
After moving to the last digit and making changes, press [MODE].
Press [Y/+] to save the change.
l
Press [N/-] to undo the change.
l
Power On/Off
You can turn the ISM radio's power on or off.
1.
Press [Y/+] to see on or off state, and which is selected.
2.
Press [N/-] to scroll to "On" or "Off."
3.
Press [Y/+] to select.
4.
Press [Y/+] to "Save." You can also press [N/-] to undo.
Network ID
Every ISM network must have a Network ID, which identifies that network and all equipment
operating in that network. All instruments, including the host, repeaters, etc., in the same
network need to be configured with the same Network ID.
1.
Press [Y/+] to increase the number and [N/-] to advance to the next digit.
2.
After moving to the last digit and making changes, press [MODE].
Press [Y/+] to save the change.
l
Press [N/-] to undo the change.
l
AreaRAE
75
User Manual
Advertisement
Table of Contents
