Table of Contents
Advertisement
When you reach the screen that says "Start Datalog?" press [Y/+] to start it. You see
l
"Datalog Started," confirming that datalogging is now on. You can turn it off by pressing
[Y/+] again.
If datalogging is running, you can leave it running. However, if you want to turn it off,
l
follow this procedure:
Press [N/-] repeatedly to step through the screens until you reach the screen that says,
"Stop Datalog?" Press [Y/+] to stop datalogging. The screen displays "Datalog Stopped"
for a few seconds, before displaying "Start Datalog?" and the datalog interval. You can
restart it anytime by pressing [Y/+] from that screen.
Memory Full Action
When the internal datalog memory is full, the AreaRAE Plus/Pro can either stop collecting data
(Stop When Full) or go back to the beginning and overwrite the data from the first entry, second
entry, etc. (Wraparound).
AreaRAE
71
User Manual
Advertisement
Table of Contents
