Sensor Selection
You can choose which sensors' data are included in the datalog. The entire list of installed
sensors is shown, and you can individually select whether their data is included.
Note: Turning a sensor off in the list does not change or erase its settings.
Data Selection
Data Selection allows you to select which types of data are stored and made available when you
download your datalog to a computer via Safety Suite Device Configurator (SSDC) software.
You can choose any or all of four types of data (you must choose at least one):
Minimum
l
Average
l
Maximum
l
Real-Time
l
AreaRAE
69
User Manual