Table of Contents
Advertisement
Pump operating normally (alternates between these two icons)
Pump blocked (blinks once per second)
Datalogging status (shown when datalogging is on, blank when off)
Battery voltage is ≥80%
Battery voltage is ≥50% and <80%
Battery voltage is ≥10% and <50%
Battery voltage is <10%
Battery error
Sensor due for calibration
Sensor due for a bump test
"All electrochemical sensors tested and calibrated to policy" tick mark (all sensors
have been bump tested and calibrated; no sensor is overdue for a bump test or
calibration according to the intervals configured on the instrument). This icon is
not shown if any sensor is due for bump testing or calibration, or if policy
enforcement is turned off
Wind speed
Wind direction
AreaRAE
20
User Manual
Advertisement
Table of Contents
