Table of Contents
Advertisement
GPS coordinates in Safety Suite Device Configurator (SSDC), and allow those coordinates to be
used on maps in SSDC running on a host computer.
You can turn the GPS power on or off.
1.
Press [Y/+] to see on and off states, and which is selected.
2.
Press [N/-] to scroll to "On" or "Off."
3.
Press [Y/+] to select.
4.
Press [Y/+] to "Save." You can also press [N/-] to undo.
Mesh
The AreaRAE Plus/Pro's secondary Mesh radio is designed to work in a RAE Systems wireless
mesh radio network. This type of flexible, robust wireless network provides reliable, low-cost
operation and supports point-to-point and point-to-multi-point networking with Safety Suite
Device Configurator (SSDC) software.
Options include:
Power On/Off
l
PAN ID
l
Channel
l
Factory Reset
l
On/Off
1.
Press [Y/+] to see on or off state, and which is selected.
2.
Press [N/-] to scroll to "On" or "Off."
3.
Press [Y/+] to select.
4.
Press [Y/+] to "Save." You can also press [N/-] to undo.
PAN ID
The AreaRAE Plus/Pro and any other devices that you want to interconnect wirelessly must have
the same PAN ID. You can set the PAN ID in the instrument or through Safety Suite Device
Configurator (SSDC).
1.
Press [Y/+] to increase the number and [N/-] to advance to the next digit.
2.
After moving to the last digit and making changes, press [MODE].
Press [Y/+] to save the change.
l
Press [N/-] to undo the change.
l
AreaRAE
73
User Manual
Advertisement
Table of Contents
