Wireless Operation - Honeywell AreaRAE Plus User Manual

Wireless Operation

Depending on the wireless configuration of the instrument and which radio modules are active,
the AreaRAE Plus/Pro can communicate directly through ISM-band radio to a RAELink3
wireless Host modem or via Wi-Fi to a Wi-Fi access point. In addition, the AreaRAE Plus/Pro is
equipped with a Mesh-radio modem that communicates with Mesh-equipped instruments such
as the MultiRAE, ToxiRAE Pro, etc., located up to 330 feet (100 meters) away. Up to eight of
these instruments' data can be relayed through the AreaRAE Plus/Pro to a PC running Safety
Suite Device Configurator (SSDC) to monitor them, as well as the AreaRAE Plus/Pro.
Note: If the AreaRAE Pro or AreaRAE Plus is equipped with Wi-Fi, and Wi-Fi is used as the
primary radio instead of ISM, then a Wi-Fi access point substitutes for the RAELink3 Host.
Note: The ISM radio acts as a repeater, providing extended range for other instruments
operating with it.
Note: AreaRAE Plus/Pro can receive up to 10 different messages from a base station PC running
Safety Suite Device Configurator (SSDC). The AreaRAE Plus/Pro can only receive a message
from Safety Suite Device Configurator (SSDC) when it is in Normal mode, and when there are no
active alarms.
AreaRAE 27 User Manual