Table of Contents
Advertisement
Programming
The menu in Programming Mode is to adjust settings, and calibrate sensors. It has the following
submenus:
Measurement
l
Alarms
l
Datalog
l
Wireless
l
Monitor
l
Calibration
l
Enter Programming in Basic Mode
Programming in Basic Mode is limited to calibration only. A password is required to access
other programming menus.
1.
To enter Programming Mode, press and hold [MODE] and [N/-] until you see the
Password screen.
2.
Input the 4-digit password:
Increase the number from 0 through 9 by pressing [Y/+].
l
Step from digit to digit using [N/-].
l
Press [MODE] when you are done.
l
AreaRAE
50
User Manual
Advertisement
Table of Contents
