Dec 15/06; Cleaning Method; Cleaning Method Table - Honeywell LMB HYPER 120-03 Component Maintenance Manual With Illustrated Parts List

TASK 21-22-91-100-804-A01
4.

Cleaning Method

A.

Cleaning Method Table

TYPE OF PARTS TO BE CLEANED
STAINLESS STEEL
FORGED LIGHT ALLOY WITH ANODIC-CHROMIC PROTECTION
CAST LIGHT ALLOY WITH ANODIC-CHROMIC PROTECTION
NITRIDE TITANIUM PLATING
CHEMICAL NICKEL PLATING
TITANIUM (*)
PLASTIC
COMPOSITE MATERIALS (POLYESTER)
ELECTRICAL AND ELECTRONIC COMPONENTS
TEFLON PLATING (**)
RUBBER (***)
CLEANING PROCEDURES
1: Heavy alkaline cleaning:
(Ref. TASK 21-22-91-100-805-A01)
2: Cleaning of the parts with solvents (non chlorinated), by dipping or spraying:
(Ref. TASK 21-22-91-100-806-A01)
3: Light alkaline cleaning:
(Ref. TASK 21-22-91-100-807-A01)
4: Cleaning of the parts with an alcohol-based cleaning agent:
(Ref. TASK 21-22-91-100-808-A01)
O O: DO THE TWO STEPS, ONE AFTER THE OTHER
(*): DO NOT USE CHLORINATED SOLVENT
(**): DO NOT USE CLEANING MATERIAL. USE A DRY LINT-FREE CLOTH
(***): DO NOT USE CLEANING MATERIAL. CLEAN WITH LOW-PRESSURE COMPRESSED
AIR
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
00001059
CLEANING
PROCEDURE
1
O
X
X
21-22-91
2 3 4
O X
X X
X X
X X
X X
X X
X
X
X
Page 4004

Dec 15/06