Honeywell LMB HYPER 120-03 Component Maintenance Manual With Illustrated Parts List page 106

SUBTASK 21-22-91-410-005-A01
(9) Final assembly
(Ref. IPL Fig. 01)
(Ref. Fig. 1)
(Ref. Fig. 2)
WARNING: HANDLE THE IMPELLER CAREFULLY, THE BLADES CAN CAUSE INJURIES.
(a) Put the impeller (01-010) in position and attach it with the lockwasher (01-030) and the
nut spiralock (01-020).
(b) Install two washers (01-090) and one nut (01-080) on the screw (01-070).
(c) For PNR 00001059 Amdt B
1 Apply a layer of adhesive material (M81B) on the mating area of the cover (01-280A).
2 Put the cover (01-280A) in position on the Control S/A (01-290A).
3 Let dry at ambient temperature during one hour.
(d) For PNR 00001059 Amdt C
1 Apply a layer of adhesive material (M81B) on the mating area of the cover (01-280B).
2 Put the cover (01-280B) in position on the Control S/A (01-290B).
3 Let dry at ambient temperature during one hour.
(e) If necessary, bond the administrative technical label (01-680), the caution label (01-690)
and the ESD label (01-700) (Ref. Fig. 2).
(f) Put the ESD protection cap (01-710) on the connector (01-100) (Ref. Fig. 1).
(g) Put the ESD protection cap (01-720) on the connector (01-130) (Ref. Fig. 1).
E. Close-up
Not applicable
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
00001059
21-22-91
Page 7020
Dec 15/06