Measurements; Intro - Honeywell LMB HYPER 120-03 Component Maintenance Manual With Illustrated Parts List

(11) Special Tools, Fixtures, Equipment and Consumables
(a)
(b)
(12) Illustrated Parts List
This Page Block contains the full list of all the parts of the component (For the detailed
description, refer to the IPL INTRO).
(13) Special Procedures
This Page Block contains the tasks which are given in other Page Blocks of the manual,
but which are necessary because of other maintenance tasks. The tasks are self-contained
repairs or preventive maintenance.
(14) Removal
This Page Block gives the procedure for the removal of modules/sub-assemblies from complex
modular components.
(15) Installation
This Page Block gives the procedure for the installation of modules/sub-assemblies in complex
modular components.
(16) Servicing
This Page Block gives the self-contained tasks which are necessary because of other
maintenance tasks.
(17) Storage
This Page Block gives the requirements for preparation for transportation, for special handling,
for packaging, for storage and for preservation: these requirements are for the component
after assembly or test.
(18) Rework
This Page Block gives the rework procedures which are necessary for in-service components.
E.

Measurements

(1) The measurements which are given in this manual come from the original manufacturing
drawings.
(2) This CMM uses the "Systeme International" (S.I.) units for quantities and values. It also gives
the imperial units in parentheses.
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
This Page Block shows all the special tools, the fixtures, the equipment and the
consumables which are necessary to do the maintenance actions which are given in
the other page blocks.
All the items shown are identified in this manual by a standard code number: Txx for
Tools, Fixtures and Equipment and Mxx for Consumable Materials.
00001059
21-22-91

INTRO

Page 5
Dec 15/06