Honeywell LMB HYPER 120-03 Component Maintenance Manual With Illustrated Parts List page 127

(b)
(c)
(4) Effectivity Code
(a)
(b)
(c)
(5) Units per Assembly
(a)
(b)
(6) Abbreviations Used
ALT FROM PNR
XXX
AMDT
AR
DELETED
DPL
EDI
EFFECT CODE
IPL
LH
MFR
MODIFIED
FROM
NHA
NP
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
The attaching parts are shown immediately after the assembly of the part. In the list, they
are below the same indentation number as the item they attach, and they are identified by
the words "Attaching Parts". They are followed by three asterisks.
The manufacturer's code, or the abbreviation NP (not procurable), is put at the end
right-hand side of the first line of the nomenclature column on the right side.
An alphanumerical index gives the effectivity of the sub-assemblies, and it gives the
detailed parts list in relation to the next higher assembly(ies) or sub-assembly(ies).
When the effectivity is fully applicable, the use code column remains empty.
The use code for the assemblies, and the detailed parts list, refer to the figure/item
number of the next higher assembly(ies) or sub-assembly(ies). Example: Effectivity 1A,
1B, 1C is written 1ABC.
The units per assembly column shows the quantity of units necessary for one next
higher assembly.
In some cases, the information is replaced by the abbreviation RF (for reference) or
AR (as required).
A part which is functionally and physically interchangeable with the initial part
after repair.
Amendment.
As required.
Deleted part.
Detailed Parts List.
Equipment Designator Index.
Effectivity code
Illustrated Parts List.
Left-hand.
Manufacturer
A part got after a different part is modified.
Next higher assembly.
Not procurable.
00001059
21-22-91
Manufacturer or Optional
Manufacturer in the DPL.
Page 10005
Dec 15/06