Honeywell LMB HYPER 120-03 Component Maintenance Manual With Illustrated Parts List page 64

SUBTASK 21-22-91-010-002-a01
(2) Removal of the Cover (01-040)
(Ref. IPL Fig. 01)
(a) Remove the four screws (01-110) and the four washers (01-120) from the connector
(01-100).
(b) Remove the four screws (01-140) and the four washers (01-150) from the connector
(01-130).
(c) Pull out the connectors (01-100) and (01-130) from the cover (01-040).
(d) Disconnect the wires from the connectors (01-100) and (01-130) with the appropriate
contacts extraction tool.
(e) Remove the six screws (01-050) and the six washers (01-060).
(f) Remove the cover (01-040).
(g) Remove the two nuts (01-080), the two washers (01-090) and the screw (01-070).
SUBTASK 21-22-91-040-001-A01
For PNR 00001059 Amdt B
(3) Disassembly of the Filter S/A (01-160A)
(Ref. IPL Fig. 01)
(a) Carefully remove the adhesive material (M81B) that holds the wires and the cables
on the filter board (01-170A).
(b) Unsolder the four wires and the two cables on the filter board (01-170A).
NOTE: Set the soldering iron to 350 °C (662 °F) for the wires and to 430 °C (806 °F)
(c) Remove the six screws (01-180), the eight washers (01-190) and the two screws (01-200).
(d) Remove the filter board (01-170A).
SUBTASK 21-22-91-040-001-B01
For PNR 00001059 Amdt C
(4) Disassembly of the Filter S/A (01-160B)
(Ref. IPL Fig. 01)
Carefully remove the adhesive material (M81B) that holds the wires and the cables
(a)
on the filter board (01-170B).
(b) Unsolder the four wires and the two cables on the filter board (01-170B).
NOTE: Set the soldering iron to 350 °C (662 °F) for the wires and to 430 °C (806 °F)
(c) Remove the six screws (01-180), the eight washers (01-190) and the two screws (01-200).
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
00001059
for the cables.
for the cables.
21-22-91
Page 3002
Dec 15/06